|
|
|
|
|
|
HomeHOME IMPROVEMENTHome ImprovementPower & Hand ToolsKreg KBK Bench Klamp System |
|
|  |
| Customer Reviews: | | Average Customer Review: ( 5 customer reviews )
Write an online review and share your thoughts with other customers.
Most Helpful Customer Reviews
5 of 5 found the following review helpful:
 third hand Mar 10, 2008
By Kramer
"Tools tools tools...."
this is a great addition to my kreg rocket pocket hole jig system... I happen to mortise the plate into my rockler router table top so I can easily clamp down style and rail pieces for drilling. also for joining the pieces it works great as well. just clamp down the two pieces and they remain secure while screwing them. It just works great anytime i need to clamp something down for routing or belt sanding (scribing) shelves or anything! its great!
4 of 4 found the following review helpful:
Easy to use clamping system Aug 04, 2008
By Dean Bielanowski
"OnlineToolReviews.com"
I have two Kreg bench clamps, the older model with the larger metal base and now this one with the smaller base. The only real difficulty is installing them into your workbench as you need to rout out part of the bench for them, but once they are in, they are quick and simple to use for a variety of clamping needs. Naturally, they are great for holding joints for pocket hole screw assembly, but have plenty of clamp force for just about anything else as well. Very handy to have one, but even better to have two!
3 of 3 found the following review helpful:
A Really Good Investment Jun 30, 2008
By Richard P. Canon
For years I have made-do with my own clamping system, often with a great deal of frustration. This is a tool well worth the purchase price. It is quick and easy to use. Installation was a little tedious until I made a jig for routing out the plate pockets.
1 of 1 found the following review helpful:
Kreg Bench Clamp Mar 17, 2009
By N. Feinberg
This product, like other Kreg items, was everything they promised.
A very useful product, one which I have installed into my workbench and have used many times in the short time since I received it.
3 of 11 found the following review helpful:
 There's a better way Jul 01, 2008
By Willie White
Anchoring this clamp to a table and then expecting to use it to put together a face frame for a cabinet will give you frustration. It does not move to accomadate the frame so you'll have a time trying to balance the rails and stiles while you're attempting to connect one joint. Some of your frame will probably be hanging off the table unless you have these expensive clamps spaced about one foot apart- very expensive, not practical for the cost or performance. Kreg makes a klamp that comes with the master kit or can be purchased separately, it is simply a vise type of clamp with enlarged pads which you can move to the frame easily without hanging the frame off the table to do a corner. I took a half sheet of plywood and knotched 3" X 3" cut-outs along two paralell edges where I can pull the frame to the edge of the plywood without hanging off and place the klamp in the cut out to clamp the jiont that I place over the opening and screw it together.
|
| | |
|
|
|
|
|
